MacSailing.net
Using Waterway Guides - Printable Version

+- MacSailing.net (https://macsailing.net/mybb)
+-- Forum: iPhoneSailing.net (https://macsailing.net/mybb/Forum-iPhoneSailing-net)
+--- Forum: iNavX (https://macsailing.net/mybb/Forum-iNavX)
+---- Forum: Tips and Tricks (https://macsailing.net/mybb/Forum-Tips-and-Tricks--23)
+---- Thread: Using Waterway Guides (/Thread-Using-Waterway-Guides)



- GPSNavX - March 24, 2015

1) Launch iNavX.

2) Go to the Chart setup either from the iNavX Preferences or from a displayed chart. When a chart is displayed select the gear button in the upper right hand corner.

3) Tap "Points of Interest" "Setup" button. Note: Points of Interest requires iOS 7 or later.

4) From the list choose the desired Waterway Guide. Note: you need to have previously purchased the guide from X-Traverse and have your X-Traverse account information entered in the "Account" in iNavX.

5) Select "Save" in the upper right hand corner to exit the Points Of Interest setup.

6) Select "Save" in the upper right hand corner to exit the Chart setup.

7) Tapping on the Waterway Guide icons (i.e. marina, anchor, bridge, etc.) on the chart will display detailed info about the specific points of interest.

8) The action button in the Points Of Interest detail view will allow navigation to, calling, or googling the point of interest.